I would like to know if someone has a KIKAKI carb diagram. I need to find out witch jet goes were. There are 3 diff. sizes. Please..
thanks
| We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
Kikaki carb help
Moderators: Old School, harryparatestis
-
AL
- Posts: 7
- Joined: December 2nd, 2006, 12:47 pm
What engine?
Butterfly or slide carb?
Mine has a butterfly carb and it's on a suzuki motor. Don't know if yours is like mine but... The main jet is 2 pieces. One bigger sleeve and a smaller one that threads inside the larger sleeve. These both thread in the center shaft with the opening facing the float bowl. There is a small jet on the side of the center shaft of the carb where the main jet threads in and it has no holes in it besides the one in the center. There is another smaller jet with 2 holes in the sides of it that threads in to the top of the carb. Of course the mixture screw threads in the side of the throttle body.
Don't know if this helps or not.
Butterfly or slide carb?
Mine has a butterfly carb and it's on a suzuki motor. Don't know if yours is like mine but... The main jet is 2 pieces. One bigger sleeve and a smaller one that threads inside the larger sleeve. These both thread in the center shaft with the opening facing the float bowl. There is a small jet on the side of the center shaft of the carb where the main jet threads in and it has no holes in it besides the one in the center. There is another smaller jet with 2 holes in the sides of it that threads in to the top of the carb. Of course the mixture screw threads in the side of the throttle body.
Don't know if this helps or not.
Who is online
Users browsing this forum: No registered users and 2 guests