We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
How do you remove the seat? 1998 Cat
Moderators: Old School, harryparatestis
How do you remove the seat? 1998 Cat
I cannot figure out to take the seat off. It's not described in my owners manual and I am trying repair a small tear in the seat.
I have another question....I cannot figure out how to lubricate the track...is that something that should be should be done?
Thanks all!
I have another question....I cannot figure out how to lubricate the track...is that something that should be should be done?
Thanks all!
- dantheman
- Posts: 91
- Joined: March 1st, 2005, 8:04 pm
info
flip the sled on its side and the seta is held on on with 2 bolts, they are on the inside of the tunnel all the way to the rear of the seat the bolt head size is 7/16 and you will need to take out both bolts, once you have the bolts out ,pull back on the seat towards the rear, the front of the seat slides into 2 clips, do not pull too hard the disconnect for the tail light also runs thru the seat.
as far as lubing , while its on its side i would put a few drops of heavy oil on the shafts right next to the wheel/washer assemblies and turn the wheels until the lube gets into the wheel and shaft, check all of them because they have a tendency to rust a bit and lock solid
that outa do ya, have fun
dantheman
as far as lubing , while its on its side i would put a few drops of heavy oil on the shafts right next to the wheel/washer assemblies and turn the wheels until the lube gets into the wheel and shaft, check all of them because they have a tendency to rust a bit and lock solid
that outa do ya, have fun
dantheman
- dantheman
- Posts: 91
- Joined: March 1st, 2005, 8:04 pm
missed something
YOU DO NOT NEED TO REMOVE TRACK ON A 98 TO GET THE SEAT OFF
DANTHEMAN
DANTHEMAN
Who is online
Users browsing this forum: No registered users and 5 guests