Hey Guys! Anyone having trouble logging in drop me an email, still a few bugs with logging in!

Kitty Cat Suzuki 60cc Engine Rebuild

Talk about the oldies, restore, repair, etc.

Moderators: Old School, harryparatestis

Post Reply
dwadholm
Posts: 7
Joined: Tue Nov 26, 2013 2:55 pm

Kitty Cat Suzuki 60cc Engine Rebuild

Post by dwadholm » Tue May 12, 2015 12:29 am

My 15 year old rebuilt our kitty cat engine this summer.

Got the Winderosa gasket kit with a new Taiwanese piston / rings, new old stock crank bearing, and new gas tank kit from Olson Brothers.

https://www.youtube.com/watch?v=IEGiOBlBaOk

Going to edit this down to as short as possible for a quick rebuild overview.

Runs great, now it just needs a new carb...


scotty1441
Posts: 8
Joined: Sun Feb 24, 2013 10:31 pm

Post by scotty1441 » Sun May 31, 2015 4:05 am

Awesome videos. I've been watching them since the first one you released after stumbling on from the starter recoil rebuild video. Thanks for posting.

dwadholm
Posts: 7
Joined: Tue Nov 26, 2013 2:55 pm

Post by dwadholm » Mon Dec 21, 2015 4:49 am

Thanks,

Here's the quick overview.


https://m.youtube.com/watch?v=jmjnE9cBVrg

dwadholm
Posts: 7
Joined: Tue Nov 26, 2013 2:55 pm

Post by dwadholm » Fri Jan 15, 2016 9:09 pm

We adjusted the governor this fall and it solved our carburetor problem.

The butterfly plate & shaft had worn a "path" in the top of the carb body so it is loose on the shaft. Plus the top plate is not tight on the shaft.

I adjusted the governor so that it would pull the butterfly back fully to rest at idle and then advanced the idle screw so that it would idle. Works great now...

Better than buying a new carb...those puppies are expensive!

I've heard you can run a Tecumseh carb on these...not sure if it's true.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests