Yes, We're still open for business! Talk about your kid-sized snowmachines today... |
Drive Shaft Issues
Moderators: Old School, snowmobilejack
-
- Posts: 4
- Joined: December 11th, 2013, 12:39 pm
Drive Shaft Issues
Ok here is the new problem that I have.
I get the snowmobile running just fine. push the Throttle The drive chain spins just fine on the sprocket. I look underneath and the track doesnt spin, however the shaft that run underneth there spins just fine. However there are 3 white things that look like they line up and drive the track and those do not spin.
Wondering if those things can wear out.
Any help here would be great
I get the snowmobile running just fine. push the Throttle The drive chain spins just fine on the sprocket. I look underneath and the track doesnt spin, however the shaft that run underneth there spins just fine. However there are 3 white things that look like they line up and drive the track and those do not spin.
Wondering if those things can wear out.
Any help here would be great
-
- Posts: 272
- Joined: January 23rd, 2008, 3:11 am
- Location: Ohio
CR16 wrote:Ok more information as I have dropped the back end of the track.
I Cannot figure out how to get the shaft out of the front end so that I can remove those white pieces to replace them
They are all stripped out
Inside the tunnel are two bolts on eachside that holds the bearing (flange plates). Both bearings are cam locked to the axel so some channellock pliers are required, just to answer your next question.
-
- Posts: 99
- Joined: June 3rd, 2008, 11:06 pm
- Location: Canada
Who is online
Users browsing this forum: No registered users and 24 guests