Seat Removal on a 97 kitty cat
Posted: December 21st, 2013, 1:44 pm
can anyone explain how to remove the seat off a 97 kitty cat?
Remove the 2 bolts(1 on each side) that hold the suspension rails onto the tunnel. This will allow you to see under the tunnel. There are 2 bolts holding the seat on. Remove those 2 bolts then kind of shimmy the seat back until it's free. Be careful though because the wire for the tail light runs under the seat. There are not bolts in the front. The seat slides into 2 tabs welded to the tunnel.
Good luck.