We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds...

1977 Kitty cat carb o ring locations?

Carburetors - adjust, rebuild, repair, etc.

Moderators: Old School, harryparatestis

Post Reply
ssirr
Posts: 4
Joined: October 23rd, 2011, 8:54 am
Location: Orangeville, Ontario, Canada

1977 Kitty cat carb o ring locations?

Post by ssirr »

Hi Guy I am new to this forum and looking for a little clarification on one of the micro fiches. http://www.fxrdeals.com/snowmobile/diag ... c_carb.htm

Where do #44 and #45 go?
I took my carb apart and I didn't see any o rings in it. It is a 1977 with a Kawasaki engine, I cant get it to idle or run properly so I assume it is the carb. I have cleaned it twice to no avail.
Thanks
Scott
Tkarcticcat's
Posts: 11
Joined: November 21st, 2011, 11:29 am

Post by Tkarcticcat's »

The two o-rings are located in the bottom center after you take the bowl off. Number 45 is on the screw in the dead center and number 44 is main nozzle which you take out by removing the set screw that's on the side of the main nozzle tube. Once the screw is backed out the main nozzle drops out through the bottom. Can you just answer me one question when you took that main nozzle out which way were the row of hole's facing in it towards the motor or toward's the air cleaner.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests