Hi Guy I am new to this forum and looking for a little clarification on one of the micro fiches. http://www.fxrdeals.com/snowmobile/diag ... c_carb.htm
Where do #44 and #45 go?
I took my carb apart and I didn't see any o rings in it. It is a 1977 with a Kawasaki engine, I cant get it to idle or run properly so I assume it is the carb. I have cleaned it twice to no avail.
Thanks
Scott
We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
1977 Kitty cat carb o ring locations?
Moderators: Old School, harryparatestis
-
- Posts: 4
- Joined: October 23rd, 2011, 8:54 am
- Location: Orangeville, Ontario, Canada
-
- Posts: 11
- Joined: November 21st, 2011, 11:29 am
The two o-rings are located in the bottom center after you take the bowl off. Number 45 is on the screw in the dead center and number 44 is main nozzle which you take out by removing the set screw that's on the side of the main nozzle tube. Once the screw is backed out the main nozzle drops out through the bottom. Can you just answer me one question when you took that main nozzle out which way were the row of hole's facing in it towards the motor or toward's the air cleaner.
Who is online
Users browsing this forum: No registered users and 10 guests