Hey Guys! Anyone having trouble logging in drop me an email, still a few bugs with logging in!

1977 Kitty cat carb o ring locations?

Carburetors - adjust, rebuild, repair, etc.

Moderators: Old School, harryparatestis

Post Reply
ssirr
Posts: 4
Joined: Sun Oct 23, 2011 12:54 pm
Location: Orangeville, Ontario, Canada

1977 Kitty cat carb o ring locations?

Post by ssirr » Sun Oct 23, 2011 1:29 pm

Hi Guy I am new to this forum and looking for a little clarification on one of the micro fiches. http://www.fxrdeals.com/snowmobile/diag ... c_carb.htm

Where do #44 and #45 go?
I took my carb apart and I didn't see any o rings in it. It is a 1977 with a Kawasaki engine, I cant get it to idle or run properly so I assume it is the carb. I have cleaned it twice to no avail.
Thanks
Scott


Tkarcticcat's
Posts: 11
Joined: Mon Nov 21, 2011 4:29 pm

Post by Tkarcticcat's » Sat Dec 17, 2011 1:49 am

The two o-rings are located in the bottom center after you take the bowl off. Number 45 is on the screw in the dead center and number 44 is main nozzle which you take out by removing the set screw that's on the side of the main nozzle tube. Once the screw is backed out the main nozzle drops out through the bottom. Can you just answer me one question when you took that main nozzle out which way were the row of hole's facing in it towards the motor or toward's the air cleaner.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest