Initial settings
Posted: January 6th, 2011, 9:35 am
Is there such a thing? I am looking for the carb and govener settings if there are some. Have a 77 kitty and I have it running but I cant get it to idle and if I squeeze the throttle to get it to idle it surges and wont settle down. I boiled the carb and cleaned the passages, set the float at level while turned upside down and put new gaskets on there too. I sprayed ether around the likely places that may leak (recoil, carb and base gaskets) and got no response.
SO, is there a initial setting for the govenor and carb that I can set them at to have a starting point. OR is there something that I am missing. This is my first 2 stroke with a GOV. I dont know if I like em......
Thanks for the help!
Later,
Kenny
SO, is there a initial setting for the govenor and carb that I can set them at to have a starting point. OR is there something that I am missing. This is my first 2 stroke with a GOV. I dont know if I like em......
Thanks for the help!
Later,
Kenny