We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds...

Need Help Replacing a Primary Coil

Kawasaki or Suzuki, assembly, disassembly, troubleshooting questions.

Moderators: Old School, harryparatestis

Post Reply
linahon
Posts: 2
Joined: January 23rd, 2006, 3:36 pm
Location: Iowa

Need Help Replacing a Primary Coil

Post by linahon »

I have a1985 Kitty Cat and I'm replacing the primary coil. I removed the flywheel and the old coil. I soldered the harness onto the coil on the same end as the old one. I put the motor back togehter and there is no spark. I looked at the old coil and see it has a ring piece soldered to the other end wire of the coil. Then the ring is placed so the mounting screw holds it in place. I think this is a step I missed. Any help on this is appreciated

Tim
72
Posts: 272
Joined: January 23rd, 2008, 3:11 am
Location: Ohio

Post by 72 »

That ring grounds the coils windings, it needs to be connected. It does not have to ground at that point but its does need to be grounded.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests