Need Help Replacing a Primary Coil
Posted: September 21st, 2010, 11:24 am
I have a1985 Kitty Cat and I'm replacing the primary coil. I removed the flywheel and the old coil. I soldered the harness onto the coil on the same end as the old one. I put the motor back togehter and there is no spark. I looked at the old coil and see it has a ring piece soldered to the other end wire of the coil. Then the ring is placed so the mounting screw holds it in place. I think this is a step I missed. Any help on this is appreciated
Tim
Tim