I would like to swap the seat from my 79 with a newer model from the 1990's. The 79 has buttons on the side to hold it down while the 90's appear to have threaded spindles.
Beyond retrofitting the seat, are the dimensions the same?
How is the newer seat held in place at the front?
We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
Seat swap
Moderators: Old School, harryparatestis
-
- Posts: 272
- Joined: January 23rd, 2008, 3:11 am
- Location: Ohio
Clips hold the front of the newer seats, I think that started in 92or93?. You need the clips to hold the front of the seat, you will also need the measurments of the mounting hole locations on the tunnel to mount the clips. Some creative use of adhesive backed velcro could get you around this if measurement are not available.
-
- Posts: 102
- Joined: November 11th, 2003, 11:22 pm
- Location: chicago
- Contact:
seat mod
we did a 94 seat on my 72 racer easy drilled the back bolted it on frt mounted it to tunnel looks awesome wanted light frame also did rear handle and hood brad
MAD BRAD
Who is online
Users browsing this forum: No registered users and 13 guests