Yes, We're still open for business! Talk about your kid-sized snowmachines today... |
FLYWHEEL KEY
Moderators: Old School, snowmobilejack
-
- Posts: 3
- Joined: February 13th, 2010, 8:25 pm
- Location: n.illinois
FLYWHEEL KEY
I have a 94 kitty cat. it was running fine,the grandaughter drove it into the barn.started it a couple weeks later,ran good but backwards. pulled the flywheel & the key was sheared,evidently just enough to bump the timing off.ordered a new key,put it back together,ran like a champ for about a hour & did it again.any ideas? this is gonna get old. thanks for any help.
-
- Posts: 272
- Joined: January 23rd, 2008, 3:11 am
- Location: Ohio
Just a guess, but it sounds like the flywheel is not cranked down enough. Sometimes a washer can hang up on the shoulder from the threaded portion, this could keep the the flywheel from seating tight enough. A drop or two of blue or green loc-tite could help if this is not the case . 30-35 ft-lbs. is the torque your looking for.
Who is online
Users browsing this forum: No registered users and 20 guests