Page 1 of 1

FLYWHEEL KEY

Posted: March 28th, 2010, 7:04 pm
by dsremodel
I have a 94 kitty cat. it was running fine,the grandaughter drove it into the barn.started it a couple weeks later,ran good but backwards. pulled the flywheel & the key was sheared,evidently just enough to bump the timing off.ordered a new key,put it back together,ran like a champ for about a hour & did it again.any ideas? this is gonna get old. thanks for any help.

Posted: March 30th, 2010, 7:24 pm
by 72
Just a guess, but it sounds like the flywheel is not cranked down enough. Sometimes a washer can hang up on the shoulder from the threaded portion, this could keep the the flywheel from seating tight enough. A drop or two of blue or green loc-tite could help if this is not the case . 30-35 ft-lbs. is the torque your looking for.

Posted: April 4th, 2010, 5:02 pm
by dsremodel
good thought, I (unfortunitely) used the old lock washer. maybe i'm my worst enemy. thanks for your reply