and quits.
i actually sprayed ether near the drive shaft and chain sprocket and it wont bog at all, runs fine, starts spinning the track and wants to go ,,, and then stop the ether spray and it Bogs again....
so just lurking her for a bit..sounds like a bearing seal.
is this something that needs to go to dealer..or can a semi-underqualified guy and maybe a buddy replace it over a couple of pints ??
We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
finally idling w/out choke, but bogs when hit throttle
Moderators: Old School, harryparatestis
-
- Posts: 2
- Joined: December 31st, 2009, 12:17 pm
- Location: canada!
-
- Posts: 12
- Joined: November 13th, 2009, 8:17 pm
- Location: Marlboro, NY
check the idler wheels in the rear. I have two 99's both in great shape but both had some seized wheels. Took them apart cleaned them up and greased them made a big difference. Also check he carb make sure its clean and not gummed up from sitting so long.
Two 99 kittys both stock with Dan the Man lift kits.
Who is online
Users browsing this forum: No registered users and 14 guests