We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds... |
Anyone have part numbers for output shaft bearings/seal?
Moderators: Old School, harryparatestis
-
- Posts: 5
- Joined: December 13th, 2009, 10:13 pm
Anyone have part numbers for output shaft bearings/seal?
On my '72 Kitty, the thing got run without oil in the gear case , so now I need the two ball bearings on the output shaft and a new seal. There is some gear and governor damage, but I think it can clean up. Hopefully. I'd buy a new output shaft and governor if I could find some.
Anyway, what I'm looking for are modern part numbers for the bearings and seals so I can go to my local parts store and get something. I can't find numbers on the old parts.
Any help would be appreciated!
Thanks,
Kevin
Anyway, what I'm looking for are modern part numbers for the bearings and seals so I can go to my local parts store and get something. I can't find numbers on the old parts.
Any help would be appreciated!
Thanks,
Kevin
-
- Posts: 5
- Joined: December 13th, 2009, 10:13 pm
Update.
Managed to get the mangled old bearings off, and bearings are:
NTN 6202
NTN 6203
.....both of which were available at my friendly parts store.
The seal doesn't have a number. Looking at Chicago Rawhide 6620 as the closest match, and if I turn the shaft down to 5/8" same as where the clutch rides (but not the whole way in to the bearing surface), I think I can use Chicago Rawhide 6247.
Still open to advice on the seals.
Thanks,
Kevin
Managed to get the mangled old bearings off, and bearings are:
NTN 6202
NTN 6203
.....both of which were available at my friendly parts store.
The seal doesn't have a number. Looking at Chicago Rawhide 6620 as the closest match, and if I turn the shaft down to 5/8" same as where the clutch rides (but not the whole way in to the bearing surface), I think I can use Chicago Rawhide 6247.
Still open to advice on the seals.
Thanks,
Kevin
-
- Posts: 102
- Joined: November 11th, 2003, 11:22 pm
- Location: chicago
- Contact:
Who is online
Users browsing this forum: No registered users and 10 guests