We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds...

97 Kitty Kat Seat Removal

Talk about the oldies, restore, repair, etc.

Moderators: Old School, harryparatestis

Post Reply
gman1001
Posts: 3
Joined: December 31st, 2007, 4:31 pm

97 Kitty Kat Seat Removal

Post by gman1001 »

How do you do it??? I'm searching for hidden bolts, but am stricking out

Any help?

Tx!
97katman
Posts: 1
Joined: December 6th, 2007, 9:53 pm
Location: albany, ny

Post by 97katman »

I have a 97 also if you take the rear two track bolts on the tunnel off i believe there 9/16, you can drop the back section of the track down when you lift the sled up, and with a long extension theres two studs underneath i believe there 7/16 or 1/2. Once you get those off make sure you unhook the connector at the back of the seat to the brake light and the connector in front of the seat. Hope that helps
gman1001
Posts: 3
Joined: December 31st, 2007, 4:31 pm

I'll give it a try tonight!

Post by gman1001 »

Thanks!
gman1001
Posts: 3
Joined: December 31st, 2007, 4:31 pm

Success!

Post by gman1001 »

Seat 'nuts' in the tunnel are 11MM...

Thanks again
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests