Suzuki Spirit problem

[Guest]

I'm working on a Kitty Cat with a Spirit engine. It has great sparks. 1st pull I had 70 psi, second 100 psi, and third 130 psi, so I've got great compression. I went through and cleaned the carb and put in fresh gas. But, the plug is still dry after I pull on it. I put my finger over the port for the carb, and it didn't seem like there was any suction. Does this mean crank seals? Any help would be appreciated. Thanks CG

[HAL-BENT]

TRY SPRAYING SOME GAS IN THE CARB. HOLD THE THOTTLE WIDE OPEN AND SPRAY THE GAS IN. WHEN WAS THE LAST TIME THIS THING WAS RUNNING?