Page 1 of 1

Ski Loop/ Handles

Posted: February 10th, 2013, 3:59 pm
by vintagecatowner001
Been looking for manufactured ski loops/ handles for the stock kitty cat skis (to race amateur stock class). Does anyone know if you can buy them ready to install or can I purchase AC ones then cut be down to fit? Or is this like every other project I have, custom made? Thank you in advance for the help.

Posted: February 10th, 2013, 9:42 pm
by snoeproe
All the ones I have seen were home designs. If you use metal ones, you usually have to pad them after welding them to the skis. I just used an old snowmobile drive belt, cut it to length, ground off some of the inside cogs, drilled the bolted them to the tips of the skis.
Plastic ones work well too, like an old pair of slide rails etc...