We will be refreshing and updating the forum over the next few weeks. You can still register and talk sleds...

Looking for a kitty Kat Lift kit

Buy, sell, or look for parts that are scarce and no longer available.

Moderators: Old School, harryparatestis

Post Reply
Brandonmrazek
Posts: 2
Joined: November 24th, 2015, 11:16 am

Looking for a kitty Kat Lift kit

Post by Brandonmrazek »

Does anyone have a Kitty Cat lift kit for sale?
earl
Posts: 27
Joined: October 4th, 2015, 8:50 pm

Post by earl »

if your handy and have a welder, I made my own . I did have some of the material so it cost me less than $20.00 to make, not pretty, but its functional...
Brandonmrazek
Posts: 2
Joined: November 24th, 2015, 11:16 am

Post by Brandonmrazek »

Did you go of the lift kit designs from this site? I don't have a welder but my buddies do. Did you do the front and rear lift kit?
earl
Posts: 27
Joined: October 4th, 2015, 8:50 pm

Post by earl »

yes I did, didn't get as fancy as the production ones, I used 2 in. boxed tubing to raise the front up, I also widened the stance by about 2 1/2 inches. I picked up some flat stock from the hardware store 3" wide, just butt welded onto the existing rear suspension plate, drilled a couple of holes to mount it to the tunnel, done.....not pretty but seems very functional. the flat stock is as thick as the factory mounting plate...
earl
Posts: 27
Joined: October 4th, 2015, 8:50 pm

Post by earl »

I hope I explained myself well enough :D if not ask away. :wink:
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests