Page 1 of 1

Looking for a kitty Kat Lift kit

Posted: November 24th, 2015, 11:37 am
by Brandonmrazek
Does anyone have a Kitty Cat lift kit for sale?

Posted: November 24th, 2015, 4:15 pm
by earl
if your handy and have a welder, I made my own . I did have some of the material so it cost me less than $20.00 to make, not pretty, but its functional...

Posted: November 24th, 2015, 5:53 pm
by Brandonmrazek
Did you go of the lift kit designs from this site? I don't have a welder but my buddies do. Did you do the front and rear lift kit?

Posted: November 24th, 2015, 10:01 pm
by earl
yes I did, didn't get as fancy as the production ones, I used 2 in. boxed tubing to raise the front up, I also widened the stance by about 2 1/2 inches. I picked up some flat stock from the hardware store 3" wide, just butt welded onto the existing rear suspension plate, drilled a couple of holes to mount it to the tunnel, done.....not pretty but seems very functional. the flat stock is as thick as the factory mounting plate...

Posted: November 24th, 2015, 10:03 pm
by earl
I hope I explained myself well enough :D if not ask away. :wink: